SHOWTEC 33038, Руководство пользователя

Страница: 31 / 48

30
Performer 2000 RGBAL
Product code: 33038
Upload
In this submenu you can export the custom programs from the master device to the connected slave
devices.
Select UPLOAD and press the ENTER button to open the submenu.
Enter the password, pressing the buttons in the following order: UP, DOWN, UP, DOWN.
Press the ENTER button to confirm the password.
While exporting, the light output of the slave devices will turn yellow and the display will show:
When the upload is finished, the display will show OK.
If there are any problems with exporting, the master and the slave devices will light in red.
If the operation was completed successfully, the master and the slave devices will light in green.
Reset
In this submenu you can restore the default factory settings and reset the custom programs.
Select RESET and press the ENTER button to open the submenu.
Enter the password, pressing the buttons in the following order: UP, DOWN, UP, DOWN.
Press the ENTER button to confirm. During reset the display will show:
When the resetting is finished, the display will show OK.
Press the ENTER button to confirm and exit the submenu.
Dimmer
In this submenu you can adjust the dimmer speed.
Select DIMMER and press the ENTER button to open the submenu.
Press the UP/DOWN buttons to choose one of the following options:
●
OFF: linear dimmer
● DIM1-DIM 4: Dimmer speed, from fast to slow
Press the ENTER button to confirm your choice.