SHOWTEC 33038, Руководство пользователя

Страница: 21 / 48

20
Performer 2000 RGBAL
Product code: 33038
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a theater spot. It is suitable only for indoor installation.
This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Performer 2000 RGBAL supports the following control modes:
●
Stand-alone: Manual (Knob mode), Static, Preset Color
● Master/Slave: Manual (Knob mode), Static, Preset Color
● DMX-512, RDM 8, 10, 13, 19 channels
For more information about how to connect the devices, refer to 5. Setup on pages 17–19.
To operate the device manually as a stand-alone device or in a master/slave setup:
● Adjust the functions by turning the rotatable controls (F, G, H) in Manual Mode. See 6.6.1. Manual
Mode on page 25 for more information.
● Adjust the levels for red, green, blue, amber, lime and cyan in Static menu. See 6.6.2. Static on page
27 for more information.
To run the preset colors without a DMX controller:
Select one of the 16 preset colors in Preset Color menu. See 6.6.3. Preset Color on page 28 for more
information.
To operate the device with a DMX controller:
Set the DMX starting address of the device in the DMX Address menu. See 5.3.5. DMX Addressing on
page 19 and 6.6.4. DMX Address on page 28.
02) Select the DMX channel mode. See 6.6.6. Personality (DMX Channel Modes) on page 29 for more
information. See 6.7. DMX Channels on pages 36–38 for complete overview of all DMX channels.