Showline SL STRIP 10IP, Руководство пользователя

Страница: 6 / 17

POWER REQUIREMENTS
3
Installation and User's Manual
SL STRIP 10 IP LED Luminaires
Power Requirements
The SL STRIP 10IP LED Luminaire operates on AC input voltages from 100 to 240 VAC.
WARNING: This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit
when not in use.
AC Power Operation
When connected to an AC source, the unit operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire contains an auto-ranging power supply.
Each luminaire can draw up to 150 Watts.
The maximum amount of units that may be daisy-chained is (A) 6 units 100VAC (10 Amps) or (B) 16 units 240VAC (10 Amps) for
The maximum amount of units that may be daisy-chained is (A) 6 units 100VAC (10 Amps) for UL standard.
Europe Standard. Refer to Table1-1 for detailed information at various voltages.
Note: For wiring of AC input connector, refer to
Connecting SL STRIP 10IP LED Luminaires to AC Power
.
Table 1 - 1 : SL STRIP 10IP LED Luminaires Voltage vs . Current
WARNING
: *These figures are based on the Maximum Allowable Input Current of 10 Amps (and the maximum power supply limit of 150
Watts). Do not overload circuits!
IMPORTANT AC POWER CONNECTION NOTES :
Connecting Power
Units can be powered in one of two ways:
D i r e c t connection to an AC power source using an AC input cable. For wiring of AC input connector, refer to
Connecting SL STRIP 10IP
LED Luminaires to AC Power
.
C o n n e ction from the AC output of another SL STRIP 10IP LED Luminaire. When using this method, it is very important not to
connect any other type of equipment.
Connecting SL STRIP 10IP LED Luminaires to AC Power
WARNING:
WARNING:
WARNING:
Only connect other SL STRIP 10IP LED Luminaires to the AC Output (Thru) connector of a SL STRIP 10IP LED Luminaire.
Wh e n using the daisy-chain connection method, ONLY connect SL STRIP 10IP LED Luminaires to the AC Output Connection of other
SL STRIP 10IP LED Luminaires. DO NOT CONNECT OTHER TYPES OF LUMINAIRES OR DEVICES
Us e o nly use approved cable types.
Do n o t overload circuits!
Do n o t connect SL STRIP 10IP LED Luminaires to dimmed circuits.
Th e M
AXIMUM allowable number of SL STRIP 10IP LED Luminaires which can be 'daisy chained' on one 10A power feed is listed
in
Table 1-1 . DO NOT EXCEED!
100 100
1.50
8
14
14
6 6 1.50
230 0.65
220 0.68
120 1.25
Voltage (AC) Voltage (AC)
Total Current (A) Total Current (A)
Max Connected Max Connected
For European Standard For UL Standard
Table 2
:
AC Input Connections
Wire Color
Purpose
Table 2, AC Input Connections describes how to connect power to your SL STRIP 10 IP. Field wiring of the SL
STRIP 10 IP is straight forward. A total of 3 wires/conductors is supplied to the unit.
Brown
Blue
Yellow
Main/Line(100 to 240 VAC)
Neutral
Ground(Earth)
For European Market