background image

Charging Other Devices: 

The LP1512 can also be used as a power bank to charge other devices. 

To use as a power bank, plug the large end of your charging cable into 

the larger USB port on the right, and plug the opposite end of the 

cable into your electronic device. 

USER MANUAL

USB

Rechargeable

Operation Instructions

Dual battery design

Rugged-durable rubber design

360° LED technology

Power bank to charge other devices

Variable on/off brightness dial

IPX4 waterproof rating

Rechargeable 2000mAh Li-ion battery (USB cable included)

Features

14725 S Porter Rockwell  Blvd Ste C
Bluffdale, UT 84065

luxpro.com

866.553.8886

Charging Instructions

Rechargeable LED Lantern

LP

1512

3

C

Batteries

High

High

ANSI/PLATO FL1 STANDARD

1175 lm

1000 lm

5h 30m

1h 45m

36m

36m

Low

75 lm

8m

LUMENS

MODES

RUN TIME

BEAM

DISTANCE

Low

75 lm

151h

8m

10h

10650, 3.7V 2000mAh Rechargeable Battery

Internal Battery & 3 C Cell Batteries*

On/Off: 

Turn the dial on the front of the lantern clockwise to turn 

the light on. Turn the dial counterclockwise completely to turn 

the light off. There will be an audible click when turned on or off. 

Adjust Brightness:

 Rotate the dial clockwise to increase the 

brightness, and counterclockwise to decrease the brightness. 

Charging Product:

The LP1512 uses a Li-poly: 3.7V 2000 mAh 

rechargeable battery. 

To charge the lantern, locate the USB dust 

cover below the power dial. Lift the cover to 

expose the two charging ports.

The lantern will turn on and can be used while charging. 

The LP1512 has a charge time of approximately 3 hours. 

A red LED light in the charge port will light up to indicate the 

lantern is charging. The light is fully charged once the light turns 

green. 

While the lantern is on, it will not charge other devices. If the 

lantern is turned on while charging a device, it will stop charging 

the device until the light is turned off. 

Not Included

Plug the supplied USB cable into the smaller USB port on the left. 

Plug the opposite end of the cable into a USB power source. 

Отзывы: