Charging Other Devices:
The LP1512 can also be used as a power bank to charge other devices.
To use as a power bank, plug the large end of your charging cable into
the larger USB port on the right, and plug the opposite end of the
cable into your electronic device.
USER MANUAL
USB
Rechargeable
Operation Instructions
Dual battery design
Rugged-durable rubber design
360° LED technology
Power bank to charge other devices
Variable on/off brightness dial
IPX4 waterproof rating
Rechargeable 2000mAh Li-ion battery (USB cable included)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Charging Instructions
Rechargeable LED Lantern
LP
1512
3
C
Batteries
High
High
ANSI/PLATO FL1 STANDARD
1175 lm
1000 lm
5h 30m
1h 45m
36m
36m
Low
75 lm
8m
LUMENS
MODES
RUN TIME
BEAM
DISTANCE
Low
75 lm
151h
8m
10h
10650, 3.7V 2000mAh Rechargeable Battery
Internal Battery & 3 C Cell Batteries*
On/Off:
Turn the dial on the front of the lantern clockwise to turn
the light on. Turn the dial counterclockwise completely to turn
the light off. There will be an audible click when turned on or off.
Adjust Brightness:
Rotate the dial clockwise to increase the
brightness, and counterclockwise to decrease the brightness.
Charging Product:
The LP1512 uses a Li-poly: 3.7V 2000 mAh
rechargeable battery.
To charge the lantern, locate the USB dust
cover below the power dial. Lift the cover to
expose the two charging ports.
The lantern will turn on and can be used while charging.
The LP1512 has a charge time of approximately 3 hours.
A red LED light in the charge port will light up to indicate the
lantern is charging. The light is fully charged once the light turns
green.
While the lantern is on, it will not charge other devices. If the
lantern is turned on while charging a device, it will stop charging
the device until the light is turned off.
Not Included
Plug the supplied USB cable into the smaller USB port on the left.
Plug the opposite end of the cable into a USB power source.