SL LEDSPOT 300 Luminaire
Quickstart Guide
SL LEDSPOT 300 QuickStart Guide
7
Fan Info
Fan Info
2U01_Fan1: XXXRPM
2U01_Fan1: XXXRPM
:
Displays fans RPM / status
Software
Version
1U01
:
V1.0.0
2U01
:
V1.0.0
:
Displays software installed in luminaire.
Personality
Status Settings
No DMX Status CLOSE / HOLD /
AUTO
Pan Reverse ON or OFF
Tilt Reverse ON or OFF
Feedback ON or OFF
Hibernation OFF / 1 to 99 Minutes
Defines fixture behaviour on loss of DMX signal. Default is
HOLD.
Setting to reverse the pan movement. Default is OFF.
Setting to reverse the tilt movement. Default is OFF.
Pan & Tilt motor position feedback. Default is ON.
Sets standby mode. Default is 15 minutes.
Service Setting
Password XXX
Password for RDM PID editing. Password is “050”
RDM PID XXXXXX
Displays RDM PID Code.
Fans Control
Auto
High
This setting sets the fans speed. Default is Auto.
Display Setting
Shutoff Time 2 to 60 minutes
Sets the amount of time the LCD display will stay on after last
button press. Default is 5 minutes.
Display Reverse AUTO / ON / OFF
This menu option flips the LCD Display 180 degrees. Default is
AUTO (automatic flips according to luminaire orientation).
Key Lock ON or OFF
This option can be set to prevent unauthorized changes (locks
display). Default is OFF.
Temperature C/F
Celsius or Fahrenheit
Displays temperature values in the set scale. Default is Celsius.
Initial Status
Control =XXX
Selection and manual adjustment of fixture parameters for initial
power up preset.
Select Signal
DMX Only / Art-Net On IP2 / Art-Net
On IP10
Selects the control system the luminaire will operate. Default is
DMX Only.
Set Universe
000~255
Sets the Art-Net Universe.
Reset Default
ON or OFF
Restores the fixture to factory defaults. Default is OFF.
Reset
Function
Reset All
Resets (re-calibrates) all motors in the luminaire.
Reset Pan&Tilt
Resets (re-calibrates) Pan and Tilt.
Reset CMY&Colors
Resets (re-calibrates) CMY wheels and color wheels.
Reset Gobos
Resets (re-calibrates) gobos.
Blade Reset
Resets (re-calibrates) Blade.
Reset Others
Resets (re-calibrates) Zoom, Prism, Frost and Focus.
Effect Adjust
Test Channel
Control = XXX
Manual selection of fixture parameters for ramping up and down.
Manual Control
Control = XXX
Select and adjust fixture parameters for local control.
Calibration
Calibrate Password
Password is “050”
Pan=XXX
Sets centre points for parameter ranges.