6
SL LEDSPOT 300 QuickStart Guide
Menu System
LCD Display Menu
The SL LEDSPOT 300 Luminaire’s LCD Display and Menu System provides local control for accessing the fixture’s settings:
Note:
If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired.
Upon power up, the LCD will display the main screen showing the product name. If DMX is enabled, the programmed address will appear after
power up.
Figure 4: LCD Display and Menu System
LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes to the menu items. When the
desired menu item is reached, press the desired Menu Button to display the menu options and to navigate and configure the menu options as
required.
To navigate and access menu settings/selections:
Step 1. Make sure unit is powered on.
Step 2. Press the desired button ( as shown in Figure 4) to access menu categories.
Step 3. Use UP/DOWN/LEFT/RIGHT buttons to navigate through the various options and settings.
Step 4. Make changes as desired.
Step 5. Press RETURN button to accept changes.
Menu Settings
The following menu settings and options are available in the SL LEDSPOT 300 Luminaire menu system.
Table 4: Menu Setting
First Level
Second Level
Third Level
Description
Function
Set Dmx
Address
001~XXX
Sets the DMX Address. 001 is default value.
Dmx Value
ALL
:
or Control
Displays DMX values for various parameters. ALL: is default.
Auto Program
Simple ten step Factory pre-programmed colour and movement
chase.
Information
Time Information
Current Time XXXX(Hours)
Total Run Time XXXX(Hours)
Last Run Time XXXX(Hours)
Last Run Password XXX
Clear Last Run ON or OFF
Running time since unit was powered on.
Total hours fixture has run.
Fixture running time since last clear of hours.
Entered to clear fixture timer. Password is “038”
Clears fixture last run time. Default is OFF.
Temperature
Info
Head Temperature XXX
℃
/
℉
Displays current temperature of the luminaire head.
Ethernet IP
Ethernet IP xxx.xxx.xxx.xxx
Displays luminaire’s IP address.