- 3 -
ｶﾞｿﾘﾝ
ｼﾝﾅｰ
３０
０
７０
０
４
０
０
４０
０
Chapter 3 Installation
Upon receiving the product, please examine its nameplate to see if the type, voltage and frequency indicated
on it conform with those of the ordered product. Also, check up the accessories for conformity.
In case of any damage to the product caused during transportation or a shortage of parts, please immediately
contact the relevant retailer or a nearby branch or sales office of Showa Denki.
Install the dust collector in a place fulfilling the following conditions:
Indoor places not get wet by rainwater
Dust collectors in the CFA series are designed
for indoor use.
For installation, avoid places liable to get wet
that may induce an electric shock and a
product failure.
No dew condensation at room temperature
Ambient temperature: 5
C to 40
C
Humidity:
not higher than 80%
High temperatures and dew condensation
could cause an electric component failure
and/or an electric shock.
Horizontal places free from vibrations
Unusual vibrations could cause the product
topple over.
No hazardous chemicals stored around
Places close to stored petrol, thinner, and other
flammable chemicals have the possibility of an
explosion and/or a fire.
Places near the chemicals, like hydrochloric
acid and sulphuric acid, that produce a
corrosive gas could cause the product to
corrode.
Places easy for maintenance
Spaces as illustrated on the left must be
secured for dust discharge, filter cloth
replacement and purified-air release.
Unit: mm
Petrol
Thinner
