![Showa Denki Dustresa CFA-110 Скачать руководство пользователя страница 11](http://html.mh-extra.com/html/showa-denki/dustresa-cfa-110/dustresa-cfa-110_operation-manual_1259951011.webp)
- 8 -
向きに注意
ナット、ワッシャ
(M6)
上の表示
ロープ
ロープ押さえ
ロープ押さえ
ロープ
(3) Insert a new filter cloth in the direction as shown
in the figure below, make sure that the cloth is
inserted in the back groove and push it into
position completely.
(3) Loosen off the M6 nuts that fix the filter cloth and
remove the cloth.
(4) Pull up this side of the filter cloth and secure it in
position with metal fixers as it was.
(4) Attach a new cloth, with the ‘Topside’ marking
facing up, and assemble the whole thing
reversely to the procedures mentioned above.
Adjust the rope’s tension (See next page).
Adjusting tension of the shaking rope
Regulate the tension of the shaking rope if the shaker handle is loosened too much or when the filter cloth
is renewed.
(1) Loosen the 2 rope-retaining wing bolts and make the shaker handle closely contact the machine body.
CFA-215S/220S
(Remove the filter cloth.)
CFA-240S
(2) While pulling the rope end, turn the rope retainer by 2 to 3 cm in the arrow-marked direction.
(3) While pulling the rope, fasten the rope-retaining wing bolt.
Insert in the correct
direction.
Nut and washer
‘Topside’
marking
Rope retainer
Rope
Rope retainer
Rope