Show Tec Edison Bar E6, Руководство пользователя

Страница: 9 / 24

8
Ordercode: 30749
Edison Bar E6
Back
Fig. 02
04)
Safety eye
05) 3-pin DMX signal connector OUT
06) 230 V pro power connector OUT (Gray)
07) Ground/earth connection
08) Built-in microphone
09) LCD d control buttons
10) LED DMX indicator
11) LED power indicator
12) 3-pin DMX signal connector IN
13) Fuse T2AL/250V
14) 230 V pro power connector IN (Blue)
15) Power switch ON/OFF
16) Safety eye
Installation
Remove all packing materials from the Edison Bar E6. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.