ShoreTel SA-100, Руководство по установке

Страница: 46 / 84

SA-100 Planning, Installation, and Administration Guide Chapter 6: Configuring the SA-100
46
6.2.6 Verify Date and Time Synchronization
Step 1
On your SA-100, open a Windows secure shell (SSH) window.
Step 2
Run the “date” command.
Step 3
Verify that the date and time on your SA-100 are synchronized with the
date and time on your NTP server.
6.2.7 Configure Backup SA-100 for Headquarters Server
The SA-100 provides services for users associated with the ShoreTel site where it is
installed and to users of any site in the ShoreTel hierarchy that shares a branch with
the installation site. Unless an SA-100 is installed or configured on the ShoreTel HQ
site, all system users may not have access to SA-100 services. To ensure that all
system users have access to SA-100 services when there is no unit installed on the HQ
site, you can configure a backup site containing an SA-100 for the HQ server.
Configuring the backup site with the HQ server establishes a hierarchical branch
that allows all users throughout the system access to SA-100 services.
To configure a backup SA-100 site on the HQ server:
Step 1
Launch ShoreWare Director.
Step 2
Click
Administration > Sites
. The Sites page appears.
Step 3
In the Site column, select HQ server site. The configuration page for the
HQ site appears.
Step 4
In the
Service Appliance Conference Backup Site
field, select a site.
NOTE
The backup site can be a logical site.
Step 5
Click
Save
.
Assign User Group
(required)
Select the user group that you to associate with the SA-
100. Audio Conference is the default value.
Backup Section
Enable Daily Backup
Check to have the SA-100 perform a backup daily.
IP Address Enter the IP address of the device that you want the
SA-100 to back files up to.
FTP Port Enter the port number that you want the SA-100 to use
for backup. This field is required.
Directory Enter the URL for the directory to which you want the
SA-100 to back files up.
User ID Enter the user name that you want the SA-100 to use to
access the backup directory.
Password Enter the password the SA-100 is to use to access the
backup directory in both fields.
Table 6-1 Registration Fields for the SA-100 (Continued)
Field Description