ShoreTel SA-100 Скачать руководство пользователя страница 34

Страница: 34 / 84

SA-100 Planning, Installation and Administration Guide

Chapter 5: Installing the SA-100

•

All power and environmental requirements are met.

5.2

Verifying the Contents of the SA-100 Box

This section lists the items you should receive in your ShoreTel SA-100 package.

Inspect the package carefully before you open it and contact the shipper if it is

damaged. If items are missing from the package, contact your ShoreTel partner or

ShoreTel technical support. The items in the box include the following:

•

ShoreTel Service Appliance 100

•

Power cord

•

Rack mounting kit

•

ShoreTel front bezel kit

•

ShoreTel Quick Install Guide.

•

Product Information Guide

5.3

Mounting the ShoreTel Service Appliance 100

The SA-100 is shipped with a rack mounting kit that includes mounting instructions.

The kit is designed to accommodate different types of equipment racks. Use the kit

instructions to attach the rails to the SA-100 and mount the unit in the rack.

CAUTION

Make sure there is ample space between the front panel and back panel

of the SA-100 and any other surface to allow ample ventilation for the

unit.

5.4

Connecting the Power Cable

The SA-100 is shipped with a power cable that is appropriate for the location to

which it is shipped. If you receive the wrong cable with the unit, contact your

ShoreTel partner or ShoreTel technical support.

WARNING

Electrical surges in the AC line can damage unprotected equipment.

ShoreTel recommends that you use a reputable AC surge protector or

UPS to connect the SA-100 to the AC line.

Press the power button on the front panel to turn the unit on. The LED in the power

button comes on and the SA-100 performs a start-up process. The fan spins up and a

sequence of numbers flash on the LED block on the front panel. The fan will quiet

down and a solid LED appear when the process is complete. The process takes about

30 seconds. If the fan does not come on or the numbers do not flash, ensure that the

power cord is plugged into the power source and the power source is working. If the

appliance still fails to power on, contact your ShoreTel partner or ShoreTel technical

support.

Содержание SA-100





















































































Результаты поиска

Содержание SA-100

Отзывы:

Похожие инструкции для SA-100

Бренды по названию

Популярные бренды

ShoreTel SA-100, Руководство по установке

Результаты поиска

Содержание SA-100

Отзывы:

Похожие инструкции для SA-100

Бренды по названию

Популярные бренды