Problem
Cause
Remedy
Motor will not run
1. Not connected to power source.
2. GFI button tripped.
3. Wiring and connections
corroded, worn, or frayed.
4. Motor brushes worn, corroded,
or need replacing.
1. Connect to power source.
2. Push in reset button on GFI.
3. Repair or Replace.
4. Repair or Replace.
12 volt Motor rotating
in the wrong direction
1. Cable leads at battery are
reversed.
1. Reverse cable leads at battery.
110 volt Motor rotating
in the wrong
direction
1. Call retailer.
1. Call retailer.
Rubber traction wheel
slipping on lift wheel
1. Wet lift wheel.
2. Rubber poly strap not tensioned
properly.
3. Incorrectly installed.
1. Dry off lift wheel.
2. Create more tension by stretching
rubber poly strap to a new
mounting
position.
3. Review installation procedures.
The groove on the
rubber traction wheel
will not stay in place
against the lift wheel
1. Rubber traction wheel not
aligned properly.
2. 5/8” pivot bolt nut over
tightened.
1. Review installation procedures.
2. Do not over tighten nut. Install and
tighten per installation instructions.
Remote does not work
Remote may be locked.
Too lock and unlock your remote, press
two small blue buttons on the sides at
the same time. You will hear a tone
when affective.
Remote does not work
Batteries may be dead
Replace Batteries.
Remote does not work
Remote not synced with control
unit.
14
