Shopsmith, Inc.
11” Bandsaw
WARNING
• Read the Safety section and complete the
Setup procedures before operating the
Shopsmith 11” Bandsaw.
• Mount the Bandsaw on Shopsmith equip-
ment only.
• Use only Shopsmith parts and accessories on
your Bandsaw. Mounting the Bandsaw on
non-Shopsmith machinery or using non-
Shopsmith parts could create a hazardous
condition and will void your warranty.
Table of Contents
Introduction .............................................. 2
Safety ......................................................... 2
Terms to Know ......................................... 5
Specifications ............................................ 7
Electrical Requirements .......................... 7
Assembly .................................................. 8
Alignment ............................................... 11
Operations .............................................. 21
Bandsaw Speeds .................................... 22
Making a Cut .......................................... 22
Helpful Cutting Hints ........................... 24
Ripping & Crosscutting ........................ 25
Resawing ................................................. 26
Making Bevel Cuts ................................ 26
Cutting Round Stock ............................. 27
Making Duplicate Cuts ......................... 27
Compound Cutting ............................... 27
Cutting Particle Board,
Plastics & Metals ................................. 28
Offsetting the Blade ............................... 29
Removing & Mounting Blades ............ 30
Maintenance ........................................... 33
Sharpening Blades ................................. 33
Resurfacing Guide Blocks .................... 34
Cleaning the Bandsaw .......................... 35
Lubricating Bandsaw ............................ 35
Storing the Bandsaw .............................. 36
Bandsaw Tires ........................................ 36
Waxing the Bandsaw ............................. 37
Maintenance Schedule .......................... 38
Troubleshooting .................................... 38
Correcting Blade Lead .......................... 38
Troubleshooting Guide ........................ 39
