PAGE 6
32. Unscrew hose locking-nut
and remove hose from inlet.
FIGURE 23
.
FIGURE 23
WARNING!
WARNING!
KEEP FILTERS CLEAN. EFFICIENCY OF THE VACUUM
IS LARGELY DEPENDENT ON THE FILTER. A CLOGGED
FILTER CAN CAUSE OVERHEATING AND POSSIBLY
DAMAGE THE CLEANER. CHECK THE FILTER
PERIODICALLY AND REPLACE AS REQUIRED.
INSTALLING THE DISPOSABLE FILTER BAG:
ALWAYS DISCONNECT THE
PLUG FROM THE WALL
OUTLET BEFORE REMOVING
THE TANK COVER.
30. Use the disposable filter bag in conjunction with the
cartridge filter for easy disposal of the debris. The bag
is not required for normal dry pick up. When picking up
fine dust or powders a high efficiency filter bag
(not
standard with all models)
must be used.
NOTE:
Use for dry pick up only.
31. With cord disconnected from the receptacle, pull
latches in an outward motion from the bottom and
remove the tank cover.
23. Move cartridge filter
cleaner handle up and down
2 to 3 times or more if
necessary to clean filter.
FIGURE 16.
24. Place handle in original
position and push down on
handle ends with thumbs to
secure in place.
FIGURE 17.
FIGURE 16
25. Rotate rear cord wrap
180 degrees clockwise to
return to original position.
FIGURE 18.
Note:
Cannot use foam
sleeve when cartridge
filter cleaner is attached to
vacuum.
FIGURE 17
FIGURE 18
FIGURE 19
FIGURE 20
28. Align the brush tabs
with the opening of the
locking unit on the rods.
Snap the brush tabs into
the locking unit on the rods.
Brush is now locked in
place.
FIGURE 21.
29. Place the new cartridge
filter and retainer into place.
FIGURE 22.
FIGURE 21
FIGURE 22
ALWAYS DISCONNECT THE
PLUG FROM THE WALL
OUTLET BEFORE USING THE
CARTRIDGE FILTER CLEANER.
WARNING!
To change cartridge filter with cartridge filter cleaner
attached to vacuum:
26. Remove cover from tank.
Turn cover upside down. Hold
one rod on the cover and
twist the brush to the unlock
position until the brush tab
is removed from the rod.
Repeat for the second rod
and brush tab. The brush is
now disengaged from the
rods.
FIGURE 19.
27. Remove filter cleaner
brush.
FIGURE 20.
Remove filter retainer and
cartridge filter.
Filter cleaner brush must be removed for wet
pickup or when using a foam sleeve.
Содержание 87556-50
Страница 12: ...PAGE 11...