Shop fox W1836, Руководство пользователя

Страница: 25 / 48

-23-
Model W1836 (For Machines Mfd. Since 04/15)
O
PE
R
ATIO
NS
Adjusting.Tailstock.
Position
The tailstock is equipped with a cam-action clamping
system to secure it to the lathe bed. When the lever is
tightened, a locking plate lifts up and secures the tool
rest to the bed.
To position tailstock along bed, do these steps:
1. Loosen lock lever and slide tailstock to desired
position (see Figure 21).
2. Re-engage lock lever.
— If lock lever does not firmly lock tailstock down
onto bed (either too loose or too tight), loosen
or tighten lock nut (located on the underside of
the tailstock) in small increments as needed to
achieve the proper clamping pressure.
Figure 21. Location of tailstock lock lever
for moving tailstock along bed.
Lock Lever