Shop fox M1117, Руководство пользователя

Страница: 13 / 40

-11-
Model M1117 (For Machines Mfd. Since 9/21)
SE
TU
P
Loose.Inventory.(Figure.4):. Qty
A..
Front Extension Arms .....................................2
B.. Rear Work Stop Support Rods ............................2
C.
Front Work Stop ...........................................1
D.. Rear Work Stop Assemblies ..............................2
E..
Rear Work Stop ............................................1
F. Bevel Gauge ................................................1
Inventory
Figure.4.
Loose inventory.
Figure.5.
Fasteners.
A
B
C
D
E
F
H
O
I
J
K
L
M
N
G
Fasteners.(Figure.5):. Qty
G.
T-Bolts M12-1.75 x 45 .....................................3
H.
Hex Bolts M12-1.75 x 30 ..................................4
I..
Hex Bolts M10-1.5 x 20 ...................................2
J..
Flat Washers 12mm .......................................7
K..
Flat Washers 10mm .......................................2
L..
Wing Nuts M12-1.75 .......................................3
M.
Cotter Pins M3 x 50 .......................................4
N.
Clevis Pins 12 x 45mm ....................................4
O.
Clevis Pins 12 x 88mm ....................................2
The following is a list of items shipped with your machine.
Before beginning setup, lay these items out and inventory
them.
Note: If you cannot find an item on this list, carefully
check around/inside the machine and packaging materials.
Often, these items get lost in packaging materials while
unpacking or they are pre-installed at the factory.