7
6
The face cover can be opened and closed with a
single touch. To open the face cover, pull down the
button in the bottom center of the face cover and
release the lock. Lift and rotate the face cover until
you hear a click when the first stopper engages. The
face cover can be secured in opened position by
continuing to rotate the face cover until it clicks in the
second stopper.
To close the face cover, gently rotate it downward
until you hear a click when the face cover lock
engages.
WARNING
z
z
In order to maximize the head protection
performance, riding your motorcycle with the
face cover in fully closed position is strongly
recommended.
z
z
Do not remove the face cover from the helmet.
In case of need to adjust the face cover or the
shield/visor, consult your local SHOEI dealer
nearby.
z
z
Do not hold the button while closing the face
cover. This can cause the face cover lock to fail to
engage. A face cover that is not locked may open
unexpectedly during riding and lead to an accident.
After closing the face cover, be sure to check that it
is locked.
z
z
When carrying the helmet, be sure to close the
face cover and check that it is locked. Carrying the
helmet with the face cover unlocked can cause
sudden opening of the face cover and the helmet
may be dropped or become damaged.
z
z
Do not open or close the face cover by grasping
the chin curtain. The chin curtain may come off.
The chin curtain reduces the influx of air turbulence
and wind noise into the helmet’s chin area.
The chin curtain can be removed by using the
following procedure.
Removing the Chin Curtain
The chin curtain is pressed against the plate at the
bottom edge of the face cover and fastened by 2
pins. Refer to the drawing. Lift up the face cover plate
near its right and left pins, and remove the pins that
pass through the chin curtain plate. Pull out the chin
curtain. Remove the chin curtain on both the right
and left sides.
Installing the Chin Curtain
As shown in the drawing, lift up the face cover plate (at
the bottom edge of the face cover) and insert the chin
curtain plate in the space created. There are pins on
the interior side of the face cover plate. Insert them
through the holes of the chin curtain plate. Attach the
chin curtain on both the right and left sides.
WARNING
z
z
With the chin curtain is installed, the sound from
nearby vehicles will be reduced. Please be aware
of this while riding.
z
z
Do not pull the chin curtain with the pins in place.
If you do, the chin curtain or face cover plate may
become damaged.
z
z
Do not carry or hold the helmet by the chin curtain.
The chin curtain may come off, and the helmet may
drop.
Projection
Opening and Closing the Face
Cover
Chin Curtain
Pin
Projection
OPEN