Shizouka Seiki val6 daystar, Руководство пользователя

Страница: 9 / 17

English
9
4
Inspection
■
Connecting the Control Device
Observations
• Please do not pour in the fuel tank the fuel used for cleaning the tank inlet filter ; after you finish to inspect inside the
fuel tank, please do not return back into the fuel tank foul fuel taken out of the tank.
• Before starting any inspection or service, to avoid electric shock, please make sure the
heater is shut down and that the power cord is disconnected.
• When cleaning the heater, please wear gloves to prevent possible injury.
CAUTION
• When the heater is controlled by the thermostat or a timer, the heater could turn itself on at any time, thus extra care
must be taken to ensure that the heater is not accidentally turned on without someone nearby who can immediately at-
tend to any problems when the heater is ignited, operating, and cooling off.
CAUTION
To avoid unexpected fire or trouble, NEVER
use the heater on combustible flooring un-
less the heat shielding mat, which is avail-
able as an option, is used.
Heat shielding mat
3-3. Use of the Heat Shielding Mat
To connect the thermostat
Take the cap off and hook up thermostat
plug (No need to rewire)
Cap
Thermostat
Direct-coupling pin
Don’t forget to put the cap back unless the thermostat is connected to heater. Without the cap, heater won’t
operate at all with all circuit cut off. Therefore, there is the direct-coupling pin inside the cap and it must
be used.
Val6_Daystar_PH1_OM_Multi.indd 9 14/03/27 15:35