Shinko WCL-13A Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 71

background image

26

SV

OUT2 proportional band

Air cooling

Oil cooling

Water cooling

Character

Name, Function, Setting Range

Default Value

Emissivity

0.900 times

• Sets infrared emissivity.

Setting characters and PV are alternately indicated on the CH1 PV/SV display.
Available only for Infrared thermocouple input.

• Setting range: 0.100 to 1.000 times

Output high limit

100 %

• Sets the output high limit value.

Not available if output is in ON/OFF control.
If Heating/Cooling control output is selected from the Block function (Console software),
CH1 output will be OUT1, and CH2 output will be OUT2.

• Setting range: Output low limit to 100 %

(DC current output: Output low limit to 105 %)

Output low limit

0 %

• Sets the output low limit value.

Not available if output is in ON/OFF control.
If Heating/Cooling control output is selected from the Block function (Console software),
CH1 output will be OUT1, and CH2 output will be OUT2.

• Setting range: 0 % to Output high limit

(DC current output: -5 % to Output high limit)

Output ON/OFF hysteresis

1.0

• Sets the output ON/OFF hysteresis.

Available only when output is in ON/OFF control
If Heating/Cooling control output is selected from the Block function (Console software),
CH1 output will be OUT1, and CH2 output will be OUT2.

• Setting range: 0.1 to 100.0

( ),

DC current, voltage input: 1 to 1000 (The placement of the decimal point follows the

selection.)

OUT2 action mode

Air cooling

• Selects OUT2 action from air, oil and water cooling.
• Available when Heating/Cooling control output is

selected from the Block function (Console
software).
Not available if OUT2 is in ON/OFF control.

•

: Air cooling (linear characteristic)
: Oil cooling (1.5th power of the linear characteristic)

: Water cooling (2nd power of the linear characteristic)

(Fig.8.2-1)

OUT2 high limit

100 %

• Sets OUT2 high limit value.
• Available when Heating/Cooling control output is selected from the Block function

(Console software).
Not available if OUT2 is in ON/OFF control.

• Setting range: OUT2 low limit to 100 %

(DC current output: OUT2 low limit to 105 %)

OUT2 low limit

0 %

• Sets OUT2 low limit value.

• Available when Heating/Cooling control output is selected from the Block function

(Console software).

Not available if OUT2 is in ON/OFF control.

• Setting range: 0 % to OUT2 high limit

(DC current output: -5 % to OUT2 high limit)

OUT2 ON/OFF hysteresis

1.0

• Sets ON/OFF hysteresis for OUT2.

Available when Heating/Cooling control output is selected from the Block function

(Console software), and when OUT2 is in ON/OFF control.

• Setting range: 0.1 to 100.0

( ),

DC current, voltage input: 1 to 1000 (The placement

of the decimal point follows the selection.)

«
...
24
25
26
27
28
...
»

Содержание WCL-13A








































































Отзывы:

Нет отзывов

Похожие инструкции для WCL-13A

Бренд: S-COM Страницы: 400

Бренд: Febco Страницы: 12

Бренд: GameSir Страницы: 8

Бренд: Game ready Страницы: 21

Бренд: VAMP Страницы: 304

Бренд: Tactical Страницы: 8

Бренд: Racal Instruments Страницы: 94

Бренд: Racal Instruments Страницы: 97

Бренд: OJ Electronics Страницы: 8

Бренд: OJ Electronics Страницы: 112

Бренд: OJ Страницы: 17

Бренд: Gardigo Страницы: 6

Бренд: VAT Страницы: 14

Bell & Gossett Technologic PPS

Бренд: Xylem Страницы: 20

Бренд: Logitech Страницы: 2

Бренд: Toro Страницы: 2

Бренд: Combi Страницы: 16

RM-LUM-M320-IT/A

Бренд: Grosvenor Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды