22
After that, the unit switches to the RUN mode as shown below (Fig. 6.1-3), (Fig. 6.1-4).
SE2
(Fig. 6.1-3)
SE1 , SEW
(Fig. 6.1-4)
6.2 Basic operation of setup
Setup is conducted in each function group.
In the function groups, CH1 and CH2 should be set respectively for the SE2 .
In Special function group, setting items are common to CH1 and CH2 for the SE2 .
(e.g.) To enter the CH1 function group for the SE2U:
(1) Press the
key 3 times in the RUN mode. (Fig. 6.2-1)
(2) Press the
key while CH1 function group characters are indicated. (Fig. 6.2-2)
(3) The unit moves to the “Input type selection” in CH1 function group.
To set (select) each item, use the
or
key, and register the value with the
key. (Fig. 6.2-3)
If the
key is pressed at the last setting item of each group, the unit reverts to
the RUN mode.
Lights when
power-on.
Indicates the input value.
Indicates the output value in a
percentage form (%).
Indicates the output value
corresponding to the input value
in a percentage form (%).
Output
value
Input
value
Input
value
Output
value
Lights when
power-on.
The relevant indicator
lights when the Input
and Output displays
indicate CH1 or CH2
value.
Indicates the input value.
Indicates the output value in a
percentage form (%).
Indicates the output value
corresponding to the input value
in a percentage form (%).
