Shinko SE series Скачать руководство пользователя страница 2

Страница: 2 / 40

Preface

Thank you for purchasing the SE series Programmable Signal Conditioner.

This manual contains instructions for the mounting, functions, operations and notes when

operating the SE series. To prevent accidents arising from the misuse of this instrument, please

ensure the operator receives this manual.

Notes

• This instrument should be used in accordance with the specifications described in the manual.

If it is not used according to the specifications, it may malfunction or cause a fire.

• Be sure to follow the warnings, cautions and notices. If they are not observed, serious injury or

malfunction may occur.

• Specifications of the SE series and the contents of this instruction manual are subject to change

without notice.

• Care has been taken to assure that the contents of this instruction manual are correct, but if there

are any doubts, mistakes or questions, please inform our sales department.

• This instrument is designed to be installed on a DIN rail within a control panel. If it is not, measures

must be taken to ensure that the operator does not touch power terminals or other high voltage

sections.

• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.

• Shinko Technos CO., LTD. is not liable for any damages or secondary damages incurred as a

result of using this product, including any indirect damages.

SAFETY PRECAUTIONS (Be sure to read these precautions before using our products.)

The safety precautions are classified into categories: “Warning” and “Caution”.
Depending on the circumstances, procedures indicated by

Caution may cause serious

results, so be sure to follow the directions for usage.

Warning

• To prevent an electric shock or fire, only Shinko or other qualified service personnel may

handle the inner assembly.

• To prevent an electric shock, fire or damage to the instrument, parts replacement may only

be undertaken by Shinko or other qualified service personnel.

Safety precautions

• To ensure safe and correct use, thoroughly read and understand this manual before using this

instrument.

• This instrument is intended to be used for industrial machinery, machine tools and measuring

equipment. Verify correct usage after consulting purpose of use with our agency or main office.

(Never use this instrument for medical purposes with which human lives are involved.)

• External protection devices such as protective equipment against excessive temperature rise, etc.

must be installed, as malfunction of this product could result in serious damage to the system or

injury to personnel. Also proper periodic maintenance is required.

• This instrument must be used under the conditions and environment described in this manual.

Shinko Technos Co., Ltd. does not accept liability for any injury, loss of life or damage occurring

due to the instrument being used under conditions not otherwise stated in this manual.

Caution with respect to Export Trade Control Ordinance

To avoid this instrument from being used as a component in, or as being utilized in the

manufacture of weapons of mass destruction (i.e. military applications, military equipment,

etc.), please investigate the end users and the final use of this instrument.

In the case of resale, ensure that this instrument is not illegally exported.

Caution

Procedures which may lead to dangerous conditions and cause

death or serious injury, if not carried out properly.

Procedures which may lead to dangerous conditions and cause

superficial to medium injury or physical damage or may degrade or

damage the product, if not carried out properly.

Содержание SE series









































Результаты поиска

Содержание SE series

Отзывы:

Похожие инструкции для SE series

Бренды по названию

Популярные бренды

Shinko SE series, Инструкция по эксплуатации

Результаты поиска

Содержание SE series

Отзывы:

Похожие инструкции для SE series

Бренды по названию

Популярные бренды