Shinko CHC-S1245, Руководство по эксплуатации

Страница: 37 / 61

Chapter 3. Operation Panel
3-6
Printed = XXXXXX
MAIN Firm = XXXX
DSP Firm = XXXX
(from the previous page)
This figure shows the total number of the
copies after the shipment from the factory.
Press MENU button to shift the next menu.
This figure shows the revision number of main
control firmware mode.
Press MENU button to shift the next menu.
This figure shows the DSP control firmware
revision.
Press MENU button to shift the next menu.
Display is changed as below depending on the revision
number of firmware.
1. up to [ MAIN Firm = 3
、
DSP Firm = 1 ]
→ （
Return to Test Print Mode
）
2. [ MAIN Firm = 4
、
DSP Firm = 2 ] or more
→ （ to the next page ）