Shinko CHC-S1245 Скачать руководство пользователя

Страница: 17 / 61

Chapter 2. Installing and Set Up

2-6

Function of Each Part

Name Function

Upper Cover

This cover may be opened to exchange the ink ribbon inspect and clean
the thermal head and to remove the jammed paper.
<Caution> Upper cover must be opened and closed gently. Thermal head

is mounted inside this upper cover.

Upper Cover Open
Lever

Pull this lever to open the upper cover.
<Caution> Do not pull this lever during printing.

Operation Panel

Control buttons, LCD and printer status display lamps are located on the
panel.

Power Switch

This switch turns on/off the power of the printer. When the

“｜”

marked

side of the switch is pressed, the power is turned on.
When the

“○”

marked side of the switch is pressed, the power is turned

off.
<Caution> Once the printer is turned off, wait at least 3 seconds before

turning it on again.

Paper Cover

Open this cover to replace paper in the paper box.
<Caution> Open and close this cover carefully.

Power Connector

To be used to connect the power cord.

USB Connector

To be used to connect the USB cable.

Thermal Head

Print Head for thermal transfer printing.
<Caution> Do not touch the thermal head, because it gets hot when

printing and also it can cause the damage to the thermal
head.

Platen Roller

Rubber roller to feed the paper.

Dust Box

Piece of paper come out from each print will be corrected into this box.
Make sure to dispose the dust every time exchange the paper.

Cleaning Roller

Rubber roller to remove the dust on the paper. Located in front side and
rear side.

Filter

This filter avoids the dust in the air to get into to the printer.

Содержание CHC-S1245






























































Результаты поиска

Содержание CHC-S1245

Отзывы:

Похожие инструкции для CHC-S1245

Бренды по названию

Популярные бренды

Shinko CHC-S1245, Руководство по эксплуатации

Результаты поиска

Содержание CHC-S1245

Отзывы:

Похожие инструкции для CHC-S1245

Бренды по названию

Популярные бренды