Shinko CHC-S1245, Руководство по эксплуатации

Страница: 36 / 61

Chapter 3. Operation Panel
3-5
Set Up Mode
With Set Up Mode, following test print and printer situation and print mode and Gloss/Matte
mode, and cleaning print can be checked.
・ Performing test print
・ Check the number of remaining paper
・ Check the number of total print
・ Check the revision number of printer control firmware
・ Set the Print Mode
・ Set the Gloss/Matte Mode
・ Performing cleaning print
Ready ： 8 ×1 0
Test Print Mode
Remain = XXX / YYY
To enter to Set Up Mode, press Menu Button when ready
status.
To escape from Set Up Mode, press Clear Button.
Comes to Test Print Mode.
By pressing Enter Button, test print will start.
Press MENU button to shift the next menu.
Comes to the number of remaining paper mode.XXX
in the display shows the number of remaining paper
and YYY shows the total number of the copies in
one roll.
Press MENU button to shift the next menu.
（ to the next page ）
Caution: The correct number of remaining paper is not displayed in the followings.
*In case that used roll paper, not new paper, is set.
*In case that the ink ribbon is changed for the different size.