Shinko Electric CHC-S2145, Руководство по эксплуатации

Страница: 26 / 36

Chapter 4. Routine Maintenance
4-1
Cleaning of Thermal Head, Platen, Cleaning Roller
By using thermal transfer technology, daily maintenance is not really necessary if the
printer is being use properly.
However, in order to keep the best print quality, it is recommended to do the cleaning
of Thermal Head, Platen and Cleaning Roller once in a month.
1. Using gauze, clean the heat element (glass
bar) of the thermal head with isopropyl
alcohol or ethyl alcohol.
2. Using gauze dipped with isopropyl alcohol or
ethyl alcohol, clean the edge of the peel-
apart plate.
3. Using gauze dipped with isopropyl alcohol or
ethyl alcohol, clean the rubber section of the
platen roller.
Caution: Make sure that the power is turned off before starting cleaning.
Thermal Head reaches high temperature just after printing. Do not
touch directly by hand. Make sure that the thermal head has been
sufficiently cooled down before starting cleaning.
When fingerprint stick to the heat element, it can damage the
Thermal Head. Do not touch directly by hand.
Be careful not to be hurt by the projections of the printer.