Shinko Electric CHC-S2145, Руководство по эксплуатации

Страница: 24 / 36

Chapter 3. Operation Panel
3-3
User Set Up Mode
To set the User Set Up Mode, press the Menu button in standby mode.
When the Menu button is pressed again, the display changes as follows.
To change to the standby mode from each menu, press the Clear button.
Ready ： 4x6
“
Remain XXX/YYY
Test Print Mode
Printed XXXXXX
MAIN Ver. XX.XX
Print Mode
DSP Ver. XX.XX
TABLE Ver. XX.XX
Language
menu
menu
menu
menu
menu
menu
menu
menu
menu
USB Ver. XX.XX
menu
"XXX" indicates the number of copies that can be printed and "YYY"
indicates the number of copies that can be printed by one ink ribbon.
Displays "0/0" when the front cover is opened or a ribbon is not set.
Test print can be performed.
To execute test print, press the Enter button.
Displays the total number of copies printed since the factory shipment.
Displays the version number of the MAN firmware.
Allows the switching of the print mode. See "Switching Print Mode" for
details of the menu.
Displays the version number of the DSP firmware.
Displays the version number of the print parameter table.
Allows the switching of the language that is displayed on the LCD. See
"Switching Display Language" for details of the menu.
Displays the version number of the USB firmware.