Shinko Denshi LF Series, Руководство по эксплуатации, Страница: 67 / 154

4 Adjusting the Scale LF(R) Series Operation Manual
- 56 -
4
Start automatic span adjustment using the internal
weight.
When “PuSH C” is displayed, press the [Cal] key.
The internal weight is activated and starts the
span adjustment automatically.
The balance display changes to “Aut. CAL,” “CH.
0,” “CH. F.S.,” “buSY,” and then “End.” When the
span adjustment is completed, the balance
returns to the weight display.
4-1-2 Span test with internal weight
This function is only available for the LFR type.
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Select span test with internal weight. Press the [Function] key several times to select “8.CA.”
Press the [Zero/Tare] key to select “8.CA. 2.”
Press the [Set] key to return to the weight display.
3
Start the span test. Press the [Cal] key.
“t.Int” is displayed.
When “PuSH C” is displayed, press the [Cal] key.
The internal weight is activated and starts the
span test automatically.
The balance display changes from “t.Int” to “t. 0,”
“t. F.S.,” “dIFF.,” and then “error display.”