Shinko Denshi LF Series, Руководство по эксплуатации, Страница: 58 / 154

LF(R) Series Operation Manual 3 Various Measuring Methods
- 47 -
3-7-3 Judgment using deviation values
Use the function setting “24.tYP.2” to judge samples using deviation values.
Judgment using deviation values by setting actual sample weights
Weigh a sample and set the reference weight, the upper-limit, and the lower-limit.
Check that the limit function for judgment using deviation values is selected. (Refer to the
previous section “Limit function settings.”)
1
Go to the actual sample weight setting mode.
<Press and hold>
Press and hold the [Set] key until “r.SEt” is displayed.
2
Weigh the sample serving as the reference
weight.
Put the sample serving as the reference weight in place
and then press the [Function] key.
3
Weigh the sample serving as the lower limit. Place the sample serving as the lower-limit in place and
press the [Function] key.
For 1-point setting, this operation completes the
setting save process. Proceed to step 5.
For 2-point setting, “H.SEt” is displayed.
4
Weigh the sample serving as the upper limit. Place the sample serving as the upper limit on the
weighing pan and press the [Function] key.
The values for judgment are saved and the
balance returns to the weight display.
5
Weigh a sample. Place the sample to be judged on the weighing pan.
The OK/LO/HI result judged according to the
upper-limit and lower-limit is indicated by “ ”.