5
Calibrate the balance after installation or
relocation.
•
Measurement values may contain errors,
preventing accurate measurement from being
conducted.
Avoid applying excess force or impact to the
balance.
•
Place the sample to be measured on the balance
carefully to prevent breakage or malfunction.
Do not use the balance in a location were it may
be subjected to abrupt changes in ambient
temperature or humidity.
•
Accurate measurement may be rendered
impossible.
•
Use the balance in an ambient temperature range
of 10°C to 30°C and with 80% or lower relative
humidity.
Do not leave the balance overloaded. (When it
is overloaded, (o-Err) is displayed.)
•
Take down the loaded sample immediately to
prevent breakage or malfunction.
Do not use the balance in a location where it is
subject to direct sunlight.
•
The indications would be illegible.
•
An internal temperature increase in the balance
may lead to inaccurate measurement.
If the balance is to be unused for an extended
period of time, unplug the adapter.
•
This conserves power and prevents deterioration.
Do not use volatile solvents for cleaning.
•
The body may be distorted.
•
To clean the unit of stains, use a piece of dry cloth
or cloth soaked in a small quantity of neutral
detergent.
Recommended
Calibrate Balance
Do Not Apply
Force
Do Not Overload
Do Not Use
Do Not Use
Do Not Use
Unplug Adapter
