49
15 Date and Time Setup
15.1 Time Setup
Set the time in Hour-Minute-Second format on a 24-hour basis.
1. Display the time.
Press the Function key for a few seconds. When
the display switches from [Func] to [d-SEt], release
the key.
Press the Function key one time.
[t IME] is displayed, and then the clock time is
displayed.
2. Set the time.
Press the Set key. You can change a blinking
digit.
Use the Zero/Tare key to change the blinking digit.
Use the Function key to blink the next digit to the right. If you press the Function key
when the rightmost digit is blinking, the leftmost digit blinks.
When you press the Print key before saving a time, the original time is displayed.
3. Save the time.
Press the Set key.
The date is displayed. Press the Function key to exit the setting screen.
15.2 Date Setup
The last two digits of the year are displayed.
You can change the date format in Function 1.
1. Display the date.
Performing
step 1
of Section 15.1 to display [d-
SEt].
(If this operation is performed after Section 15.1,
skip this
step 2
.)
Press the Function key to display the clock time and press the Function key again.
The display automatically indicates a date after indicating [dAtE].
2. Set a date.
Press the Set key. You can change a blinking digit.
Use the Zero/Tare key to change the blinking digit.
Use the Function key to blink the next digit to the right.
If you press the Function key when the rightmost digit is blinking, the leftmost digit blinks.
When you press the Print key before saving a date, the original date is displayed.
3. Save the date.
Press the Set key.
Continuous
press
Key released
Continuous
press
Key released
