Shining 3D Intraoral Scanner Скачать руководство пользователя страница 8

Страница: 8 / 74

Intraoral Scanner User Manual

All electrical and electronic devices must be disposed of separately from your other

household waste in order to promote reuse, recycling and other forms of recovery, to

prevent any potential adverse effects of hazardous substances on the environment

and human health, and also to reduce the amount of waste in landfill. This includes

accessories such as power adapters, power cords, etc. Do safely dispose of the

device and its accessories in accordance with applicable laws and regulations.
For specific information on disposal of your device and the packaging, contact your

local distributor or service provider.

Typographics

Special notes, cautions, and warnings that appear throughout this

User Manual

are

designed to ensure that you perform specific tasks properly, preventing unnecessary

errors.

This icon marks NOTE(S); additional information for particular situation.

This icon marks CAUTION(S); improper actions or conditions that may

damage the product or injury, and consequently void your warranty or
service contract or lose the patient data or system data.

This icon marks WARNING(S); the safety instructions that you must

precisely follow in order to avoid injury. Failure to observe can cause

damages to your product, or result in personal injuries, or even death.

Warranty

The warranty is void if unauthorized personnel perform service or maintenance on the

set of

Intraoral Scanner

. To ensure correct product performance and to obtain

warranty service, contact technical support. For more information, see

Contact

information on page 4

Contact information

Manufacturer

Shining 3D Tech Co., Ltd.

No.1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang, China

en.shining3d.com

Customer Support

：

[email protected]

Содержание Intraoral Scanner











































































Результаты поиска

Содержание Intraoral Scanner

Отзывы:

Похожие инструкции для Intraoral Scanner

Бренды по названию

Популярные бренды

Shining 3D Intraoral Scanner, Руководство пользователя

Результаты поиска

Содержание Intraoral Scanner

Отзывы:

Похожие инструкции для Intraoral Scanner

Бренды по названию

Популярные бренды