|
25
|
CHAPTER
4
Setting up the scanner
Connecting the scanner
CAUTIONS
• Ensure the supplied software programs are installed
on your computer before the connection.
• Install the scanner in accordance with the
instructions stated in this
User Manual
.
• Use the scanner only in dental laboratories, dental
clinics, and equivalent environment.
• Do not install, place, and use the scanner in dusty
and damp environment or in the areas of
temperature extremes or in direct sunlight.
• Prepare a flat surface, e.g. your desk, for the scanner
and the cradle. Do not place them on a slanted
surface.
• Before the installation is completed, do not plug the
power adapter into the wall outlet or turn on the
scanner until you are instructed to do so.
• Always return the scanner to the cradle when it is
not in use. Do not place the scanner in heated or wet
surfaces as this can cause damage to the tip and
scanner.
• It is normal that the scanner gets warm when in use.
WARNING
Ensure that you use only the supplied power adapter,
power cable, and USB cable.
