FreeScan UE_ User Manual _V1.2.0.0 8
3. Operation
This Chapter mainly explains how to perform scanning, cutting, and setting to the models through the
software.
Double-click
to enter the operational interface of FreeScan UE.
3.1 Workflow
If it is the first time you operate the system, refer to the following process.
Figure 3-1 Operation flowchart
3.2 Calibration
Calibration is performed to the whole Device. Through the calibration, the device parameters are recalculated,
which not only ensures the accuracy of the Device, but also improve the quality of its scanning.
3.2.1 Notes
⚫
The accuracy of calibration directly affects the scanning accuracy of the System. Re-calibration is required
in the following circumstances:
－
When the scanner is used for the first time, or when it is reused after being laid idle for a long period
of time.
