Shining 3D EinScan Pro 2X, Руководство пользователя

Страница: 121 / 137

SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.3.0.0 - User Manual – July 2019 121
11. HD Prime Pack
Prime (HD Prime pack add-on) is an add-on for EinScan Pro 2X Plus (2X+) only. It
allows Feature alignment under HD mode and improve the speed and allow markers-
free scanning experience when the scanned objects have enough geometry.
Texture is not available in this mode.
⚠
Warning: Prime uses Class 1 infrared laser. Class 1 laser is safe under normal use. It means the
maximum permissible exposure is not exceeded when viewing with naked eye. But we suggest to
avoid direct exposure to the eyes while scanning. HD Prime is not suggested to use for face
scanning.
11.1 Hardware
11.1.1. Content
HD prime
⚠
Note: HD prime is available only for EinScan 2X Plus
11.1.2. Installation
Before installation, make sure the device is powered off.
Remove the add-on port cover on the top of the scanner. (1)
Rotate the hook (rotary lever) to the left side. Plug in the HD Prime Pack. (2)
Turn the hook (rotary lever) to the right to lock the Prime in position. (3)
Plug the scanner to the computer then plug in the power cable; the drivers will install
automatically.
To remove HD Prime, rotate the hook (rotary lever) clockwise before unplug.