Shini SG-3650E, Руководство пользователя

Страница: 51 / 56

51(56)
Picture 6-2 ： Daily Maintenance of V-belt
Motor 50Hz
18.5/22kW 30/37kW 45-55kW
New belt
15mm 14mm 15mm
Used belt (after be
used 6 months)
19mm 19mm 19mm
Motor 60Hz
18.5/22kW 30/37kW 45-55kW
New belt
18mm 17mm 16mm
Used belt (after be
used 6 months)
23mm 23mm 20mm
6.2.2 Adjust the V-belt
1) Take down the side plate on the control box that is located on the right side of
the machine.
2) Take out the storage bin; loose the position adjusting screws of the motor.
3) The tension of the belt could be altered by adjusting the distance between
motor and driving wheel. Tighten the screws after you finished the
adjustment.
4) Lockup the screw as figure 6-3 shows
5) Re-check belt tension after 20 to 30 hours operation under full load.
Picture 6-3 ： Adjust the V-belt
6.3 Lubrication
6.3.1 Lubricating Oils
Xin Chang Long: FX-00
FX-000