Shini SG-23E, Руководство пользователя

Страница: 35 / 41

35(41)
6.1.1 Changing the Blade
Be careful when holding the blades, they are sharp and can cause
personal injury. Use protective gloves!
Every time the blades are changed, the blade fastening hexagon socket
cap screws (specification=M10 × 30mm, strength 12.9 and hardness
HRC41) must be replaced by new ones.
Notice!
Do not install the cutters by working together, because this could bring
personal injury. Use a thick wood block to stop the rotating knives from
turning.
1) Open the door of the chamber to take out the screen and then open the
feed box.
2) Unscrew the screw on the pressing block of the fixed blade, Then take the
blade out.
3) Unscrew the pressing block of the rotating blade, then take the blade out.
4) After take out the blade, clean the groove of the blade.
5) Install the new blade.
6) Check the blade. Turn around the blade rest till all the blades could rotate
freely.
Picture 6-1: Changing the Blade
6.2 Transmission
6.2.1 Daily Maintenance of V-belt
The granulator is driven by four V-belts, made in China: A-1600(SG-23E); A-1676
model (SG-30E) .
1) Check the V-belt.