DTA-SDH/155
Operating Manual
Shineway Technologies, Inc.
9
“Load”—load a stored configuration file as in Figure 2-3 Configuration File:
Figure 2-3 Configuration File
Click ”Load” to pop up a stored configuration file, select a file name and confirm. In this case,
configuration parameters are the contents of a selected configuration file. Press “Set” to make the
configuration valid.
“Insert”
—
insert error code, overhead and alarm for a test.
“Start”
—
press the current configuration to implement a test. When the test starts, the run key
on the upper part of the interface becomes green, and “Start” key changes to “Stop” key. Click the
stop button to suspend the current test. At the same time, the pointer light “Start” on the upper part
of the interface returns to grey;
“Exit”
—
exit the current interface (test status unchanged), and return to the previous interface.
2.1. Test Mode
As in Figure 2-4, the instrument has nine test modes.
Figure 2-4 Test Mode Interface
