manualshive.com logo in svg

Shindaiwa EB212, Руководство владельца/оператора

Поделиться
Скачать
Shindaiwa EB212 Скачать руководство пользователя страница 18

18

A

Exhaust Port Cleaning

Level 2.

Parts Required: 

  As needed: Heat Shield

1.    Remove engine cover.  (See "Cleaning Cylinder Fins for step by 

step instructions)

2.    Place piston at top dead center. Remove muffler (A), heat shield 

(B), and eyeplate (C). 

3.    Use a wood or plastic scraping tool to clean deposits from cylin-

der exhaust port.

IMPORTANT 

Never use a metal tool to scrape carbon from the exhaust port.  

Do not scratch the cylinder or piston when cleaning the exhaust 

port. Do not allow carbon particles to enter the cylinder. 

4.    Inspect heat shield, and replace if damaged.

5.    Install heat shield, muffler, and eyeplate.

6.    Tighten muffler mounting bolts (or nuts) to 80-95 in•lbf  (90-110 

kgf•cm).

7.     Install engine cover and attach spark plug lead.

8.    Start engine, and warm to operating temperature.

9.     Stop engine, and re-tighten mounting bolts (or nuts) to specifica

-

tions.

b

c

Содержание EB212





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды