Shindaiwa DGK14F, Руководство владельца и оператора, Страница: 24 / 50

21
(3) Engine Oil Replacement Amount
Total Lubrication Oil Amount
1.9 (0.1) gal
．
Value in parenthesis is the filter capacity.
8-2. Checking Coolant
CAUTION : BURNS

Do not open the radiator cap immediately after stopping the engine. Doing so
will result in steam gushing out.

Hot steam gushes out from the coolant sub-tank if the generator overheats.
Do not touch the coolant sub-tank.
Check that the sub-tank coolant level is in between FULL and LOW. If the sub-tank coolant is
lower than the LOW level, add coolant to the sub-tank and radiator.
(1) Filling the Sub-Tank
Remove the sub-tank cap.
Fill the sub-tank with coolant until it reaches
the FULL line.
Re-attach the cap.
(2) Filling the Radiator
Remove the radiator plate.
Remove the radiator cap.
Fill with coolant through the filler neck until the
radiator is full.
Re-attach and tighten the radiator cap.
Attach the radiator plate.
< Note >

Use GM SPEC 6277M or equivalent.

Use a 50:50 mix of Long Life Coolant (LLC).

Always use potable water when mixing the coolant.

Use LLC with the same mixture ratio in the coolant sub-tank.

Do not increase the LLC mixture ratio unless it is necessary. Doing so could result in overheating
or another fault/malfunction.

If adding LLC, be sure to use the same brand/type that is still in the generator.

Do not mix different brands/types. Doing so could result in a chemical reaction and the creation of
toxic substances.

Change the LLC every 1,000 hours or 2 years.

LLC is a toxic substance. Wear rubber gloves and other protective wear when handling.

If someone mistakenly ingests LLC, induce vomiting immediately and seek medical care.
1
LOW
FULL
Sub-Tank
2
3
1
2
3
5
4
Filler Neck
給水口
Radiator Plate
Radiator Cap