Shindaiwa DGK125F страница 7 Скачать руководство пользователя

Страница: 7 / 68

CAUTION : INJURY



Always b

e sure to use Lifting Hook when lifting up the generator, and slowly lift it straight

up.



Personnel performing

lifting work must wear protective gear such as helmets, safety shoes

and gloves.



Position the generator on a level stable surface so that it cannot slide or move in any

manner.



Before starting operation, always be sure to turn off all switches of equipment using the

generator and all breakers to OFF.



Do not move the generator during operation.



Do not operate the generator if it has been modified or any parts have been removed.



Securely fix the equipment with rope or similar item to avoid any unexpected move when
transporting by truck or other vehicle.

CAUTION : PROPERTY DAMAGE



Do not use the equipment for any improper applications. Improper usage can result in an

accident or malfunction.



If using this generator for medical equipment, check before use with the medical equipment

manufacturer, doctor, hospital or similar entity.



Check that the generator output setting, output terminal connection and load power source

are consistent.



Cable burnout can occur due to generated heat if the load current exceeds the allowable

current of the cable.



The voltage drop between cables is large if the cable is excessively long or

thin, resulting in

decreased input voltage to equipment using the generator, thereby causing decreased
performance, faulty operation and malfunction.

Содержание DGK125F





































































Результаты поиска

Содержание DGK125F

Отзывы:

Похожие инструкции для DGK125F

Бренды по названию

Популярные бренды

Shindaiwa DGK125F, Руководство владельца и оператора

Результаты поиска

Содержание DGK125F

Отзывы:

Похожие инструкции для DGK125F

Бренды по названию

Популярные бренды