Shindaiwa DG1000ANZ, Руководство владельца и оператора

Страница: 41 / 56

38
OIL FILLER CAP OIL FILLER
OIL LEVEL INDICATOR
OIL DRAIN PLUG
(1) Engine Oil Replacement
First Time 50 hours
Thereafter Every 200 hours
Remove the oil filler cap.
Remove the oil drain plug and drain the
engine oil.
Reinstall the drain plug.
Add oil through the oil filler until it is at the
maximum level while checking the fuel level
using the oil level indicator.
Attach the oil filler cap.
< NOTE >
Refer to section “8-1. Checking Engine Oil” for engine oil replacement amounts and types.
After reinserting the oil drain plug and shortly after starting the engine, be sure to always check
that there is no oil leakage.
(2) Replacing the Oil Filter
First Time 50 hours
Thereafter Every 400 hours
Drain the engine oil. (Refer to section “1. Engine Oil
Replacement”.)
Remove the oil filter using a filter wrench.
Spread a thin layer of oil on a new oil filter gasket.
Screw the new filter into place and tighten it by
hand until the gasket contacts the seat. Then,
give it additional 3/4 - 1 turn to seat the filter,
using an oil filter wrench.
Add engine oil to the generator.
Shortly after starting the engine, always be sure to
check that there is no oil leaking from the seal
surface.
Gasket
1
2
3
4
5
1
2
3
4
5
6