Shindaiwa DG1000ANZ, Руководство владельца и оператора

Страница: 18 / 56

15
Voltage Regulator and Throttle Lever
(1) Voltage Regulator
The dial adjusts generator output voltage.
By turning the dial clockwise, an operator can increases the voltage.
By turning the dial counter-clockwise, an operator can decrease the
voltage.
(2) Throttle Lever
①
Throttle Lever
The lever is to adjust the engine speed.
Set it to
＜
START POSITION
＞
when the engine
starts and warms-up or cools down.
When the rated power is used, set it to
＜
RUN POSITION
＞
(50Hz).
②
Frequency Adjusting Screw
Set the throttle lever to
＜
RUN POSITION
＞
and
loosen the fixing Screw nut.
Turn the screw to
＜
INCREASE
＞
to get high
frequency and to
＜
DECREASE
＞
to low frequency.
< NOTE >
The equipment is set it at 50Hz and delivered.
You can get the frequency of 50Hz under the rated output load in case adjusting it as per the
following frequency under no load.
No-load frequency(Revolution)
50Hz Operation 52.5Hz
（
1575min
-1
）
RUN POSITION START POSITION DECREASE INCREASE
FREQUENCY ADJUST THROTTLE LEVER
Throttle Lever
Frequency Adjusting Screw
Fixing Screw Nut