Shindaiwa C254 Скачать руководство пользователя

Страница: 32 / 32

Yamabiko Corporation

7-2 Suehirocho 1-Chome, Ohme,

Tokyo, 198-8760, Japan

Phone: 81-428-32-6118

Fax: 81-428-32-6145

ECHO Incorporated.

400 Oakwood Road

Lake Zurich, IL 60047-1564

U.S.A.

Telephone: 1-877-986-7783

Fax: 1-847-540-8416

www.shindaiwa.com

T10611001001/T10611999999

T10512001001/T10512999999

Servicing Information

Parts/Serial Number

Genuine Shindaiwa Parts and Assemblies for your Shindaiwa products are available only from an Authorized

Shindaiwa Dealer. When you do need to buy parts

always

have the Model Number, Type and Serial Number of the

unit with you. You can find these numbers on the engine. For future reference, write them in the space provided

below.

Model No. _____________

SN. ______________

Service

Service of this product during the warranty period must be performed by an Authorized Shindaiwa Service Dealer.

For the name and address of the Authorized Shindaiwa Service Dealer nearest you, ask your retailer or call: 1-877-

986-7783

Dealer information is also available on WWW.SHINDAIWA.COM. When presenting your unit for Warranty

service/repairs, proof of purchase is required.

Consumer Product Support

If you require assistance or have questions concerning the application, operation or maintenance of this product you

may call the Shindaiwa Consumer Product Support Department at 1-877-986-7783 from 8:30 am to 4:30 pm (Central

Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.

Warranty Registration

To ensure trouble free warranty coverage it is important that you register your Shindaiwa equipment by filling out the

warranty registration card supplied with your unit. Registering your product confirms your warranty coverage and pro

vides a direct link if we find it necessary to contact you.

Additional or Replacement Manuals

Replacement Operator and Parts Catalogs

are available from your Shindaiwa dealer or at WWW.SHINDAIWA.

COM or by contacting the Consumer Product Support Department (1-877-986-7783). Always check WWW.SHINDAI-

WA.COM for updated information.

Содержание C254

































Результаты поиска

Содержание C254

Отзывы:

Похожие инструкции для C254

Бренды по названию

Популярные бренды

Shindaiwa C254, Руководство владельца/оператора

Результаты поиска

Содержание C254

Отзывы:

Похожие инструкции для C254

Бренды по названию

Популярные бренды