13
WARNING!
Never start the engine from the operating position.
1. Slide the ignition switch to the “ON” position.
2. Set the throttle trigger to the “fast idle”:
ON
Fast idle
button
Slide ignition to ON
Primer Bulb
Press primer
bulb...
a. Depress and hold the throttle lock, then squeeze the throttle trigger.
b. Depress and hold the fast idle button.
c. Release the throttle trigger and throttle lock, then release fast idle button.
Throttle
trigger
Throttle Lock
Starting the Engine
IMPORTANT!
Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF
or STOP.
NOTE
:
The blade cover is used for transportation and storage. Remove blade cover before using the unit.
WARNING!
The attachment will operate immediately when the engine starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could become entangled or thrown, and surfaces that
could cause loss of control.
3.
Press the primer bulb until fuel can be seen flowing in the transparent
return tube.
IMPORTANT!
The primer system only pushes fuel through the carburetor. Repeatedly pressing
the primer bulb will not flood the engine with fuel.
4. Set the choke lever to the CLOSED position if engine is cold.
CLOSE
choke
Set the choke lever to the CLOSED position
