Shindaiwa AHS254 Скачать руководство пользователя страница 10

Страница: 10 / 32

The throttle trigger free play should

be approximately 4 - 6 mm (3/16 -

1/4 in.). Make sure that the throttle

trigger operates smoothly without

binding. If it becomes necessary to

adjust the trigger free play, follow

the procedures and illustrations that

follow.
1. Loosen the air cleaner cover

knob(s) and remove the air cleaner

cover.

2. Turn the cable adjuster in or out as

required to obtain proper free play

4 - 6 mm (3/16 - 1/4 in.).

3. Reinstall the air cleaner cover.

Throttle trigger free play

Cable

Adjuster

4 - 6 mm

(3/16 - 1/4 in.)

Throttle trigger free play

Assembly

(continued)

Travel Limiter

The cutter assembly can be adjusted

to 10 different positions ranging from

90° to 225° from the outer tube as

shown. Always make sure the latch

lock is securely locked after each

adjustment.

NOTE:

This articulated hedge trimmer is

equipped with a travel limiter that

prevents the cutter assembly from

rotating outside of the 90°- 225°

range.

The travel limiter prevents the cutter

assembly from rotating outside of the 90°-

225° range

The cutter assembly can be adjusted to 10

different positions

Travel limiter and adjustment range

WARNING!

Always make sure the latch

lock is securely locked after each

adjustment

Various

positions

possible

225°

135°

90°

Adjusting cutter assembly for storage or transportation

1. With the engine off, install the blade cover onto the blade.
2. Using the procedures described above, rotate the cutter assembly so it is

parallel to the tube. Make sure the latch lock and the latch release return

securely to a locking position.

3. Make sure the blade cover is in place on the blade before storing or transporting.

WARNING!

Never run the engine when adjusting the cutter assembly.

Make sure the blade cover is in place before

storing or transporting

Transport / storage position

Содержание AHS254

































Результаты поиска

Содержание AHS254

Отзывы:

Похожие инструкции для AHS254

Бренды по названию

Популярные бренды

Shindaiwa AHS254, Руководство владельца/оператора

Результаты поиска

Содержание AHS254

Отзывы:

Похожие инструкции для AHS254

Бренды по названию

Популярные бренды