9
Cable
Adjuster
Rotate cable
adjuster in or out
to obtain proper free play
Lock
Nut
4 - 6 mm
(3/16 - 1/4 in.)
Throttle trigger free play
The cutter assembly can be adjusted
to eleven different positions rang-
ing from 120° to 270° from the outer
tube as shown. Always make sure the
latch lock is securely locked after each
adjustment.
Cutter Assembly Positions
270°
120°
Various blade
positions
possible
Cutter
Assembly
Positions
Assembly
(continued)
1. With the engine off, install the blade
cover onto the blade.
2. Using the procedures described on
the previous page, rotate the cutter
assembly so it is parallel to the tube.
Make sure the latch lock and the
latch release return securely to a
locking position.
3. Make sure the blade cover is in
place on the cutters before storing or
transporting.
Gearcase rotated to the storage/
transportation position
Adjusting for Storage or Transportation
WARNING!
Never run the engine
when adjusting the cutter
assembly.
Adjusting for Storage or Transportation
The throttle trigger free play
should be approximately 4 - 6 mm
(3/16 - 1/4 in.). Make sure that the throttle
trigger operates smoothly without binding.
If it becomes necessary to adjust the
trigger free play, follow the procedures
and illustrations that follow.
1. Loosen the air cleaner cover knob(s)
and remove the air cleaner cover.
2. Loosen the lock nut on the cable
adjuster. Turn the cable adjuster in or
out as required to obtain proper free
play 4 - 6 mm (3/16 - 1/4 in.).
3. Tighten the locknut.
4. Reinstall the air cleaner cover.
Throttle trigger free play
Содержание AH242
