background image

3

This product conducts 

electricity. Keep the product 

and/or operator a minimum 

distance of 10 meters (33 feet) 

away from electrical sources 

and power lines.

Be aware of the danger 

of falling debris.

33 ft

10 M

Always wear a hard hat 

to reduce the risk of head 

injuries during operation of 

this machine. In addition, 

always wear eye and hearing 

protection. Shindaiwa 

recommends wearing a 

face shield as additional 

face and eye protection.

DANGER!

THE ARTICULATED 

HEDGE TRIMMER IS NOT 

INSULATED AGAINST 

ELECTRICAL SHOCK! 

Approaching or contacting 

electrical lines with the trimmer 

could cause death or serious 

injury. Keep the trimmer at least 

10 meters (33 ft.) away from 

electrical lines or branches that 

contact electrical lines.

Safety

An articulated hedge trimmer has the 

potential to cause serious personal 

injury to the operator or bystanders 

if misused, abused or mishandled. 

To reduce the risk of injury, you must 

maintain control at all times, and 

observe all safety precautions during 

operation. Never permit a person 

without training or instruction to 

operate this trimmer!

WARNING!

Do not make un-authorized 

modifications or alterations to your 

articulated hedge trimmer or its 

components.

Never operate this tool or any 

other power equipment if you are 

tired, ill, or under the influence of 

alcohol, drugs, or any substance 

that could affect your ability or 

judgement.

WARNING!

WARNING ! 

Surface can 

be hot. Always wear gloves 

when handling this unit.

WARNING!

The ignition components of this machine generate an electromagnetic field during operation which may interfere 

with some pacemakers.  To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their 

physician and the pacemaker manufacturer before operating this machine.   In the absence of such information, ECHO 

does not recommend the use of ECHO products by anyone who has a pacemaker.

Содержание AH242

































Отзывы: