background image

10

 

WARNING!

 

Alternative fuels, such as E15 (15% ethanol), E85 (85% ethanol) or any fuels not meeting Shindaiwa requirements 

are NOT approved for use in Shindaiwa gasoline engines.

  Use of alternative fuels may cause performance problems, 

loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper 

clutch engagement.  Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other 

engine components.

 

Fuel Requirements

 

Gasoline - 

Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may 

contain up to 

10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) 

is 

NOT

 approved. ECHO brand Power Fuel™ is 93 octane, ethanol-free fuel premixed with ECHO Red Armor® 

engine oil at 50:1 ratio. Use of ECHO Power Fuel™ is recommended to extend engine life in all air-cooled 2-stroke 

and 2/4-stroke hybrid engines.

2 Stroke Mixture Oil 

A 2-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards 

must be used. Shindaiwa Red Armor

TM

 2-Stroke Oil is strongly recommended as it meets this standard and is 

specifically formulated for use in all Shindaiwa 2-stroke engines. Engine problems due to inadequate lubrication 

caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine 

warranty.

Mixing Fuel

Examples of 50:1 mixing 

quantities

IMPORTANT!

Shindaiwa Red Armor

TM

 2-Stroke oil engine oil may be mixed at 50:1 ratio for 

application in all Shindaiwa engines sold in the past, regardless of ratio specified 

in those manuals. 

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, 

ninety (90) days when a fuel stabilizer is added. Use of unmixed, improperly 

mixed, or stale fuel, may cause hard starting, poor performance, or severe engine 

damage and void the product warranty. Read and follow instructions in the Long 

Term Storage section of this manual. 

Handling Fuel

  

  

 

DANGER!

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

• Use an approved fuel container. 

• DO NOT smoke near fuel.

• DO NOT allow flames or sparks near fuel.

• Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

• NEVER refuel a unit when the engine is HOT or RUNNING!

• DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

• DO NOT overfill fuel tank.  Wipe up spills immediately.

• Securely tighten fuel tank cap and close fuel container after refueling.

• Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

• Move at least 3 m (10 ft.) from refueling location before starting the engine.

Содержание AH242

































Отзывы: