background image

2

 

WARNING!

The engine exhaust from 

this product contains chemicals 
known to the State of California to 
cause cancer, birth defects or other 
reproductive harm.

WARNING!

A statement preceded by the 

triangular attention symbol and the 
word “WARNING” contains informa-
tion that should be acted upon to 
prevent serious bodily injury.

PAGE

Contents

PAGE

PAGE

Introductions

The Shindaiwa 502s chain saw is 

designed and built to deliver superior per-

formance and reliability without compro-

mise to quality, comfort, safety, or durabil-

ity. Shindaiwa high performance engines 

represent the leading edge of 2-cycle 

engine technology, and deliver exception-

ally high power at remarkably low dis-

placement and weight. As a professional 

owner/operator, you’ll soon discover why 

Shindaiwa is simply in a class by itself.

IMPORTANT!

The information contained in this manual 

describes units available at the time of 

production. While every attempt has been 

made to give you the very latest informa-

tion about your Shindaiwa  502s chain saw, 

there may be some differences between 

your saw and what is described here. 

Shindaiwa Inc. reserves the right to make 

changes in production without prior notice, 

and without obligation to make alterations 

to units previously manufactured.

Attention Statements

IMPORTANT!

All chain saw service, other than the 

items listed in the owner’s manual mainte-

nance instructions, should be performed 

by trained Shindaiwa chain saw service 

personnel. (For example, if improper 

tools are used to remove the flywheel, 

or if an improper tool is used to hold the 

flywheel in order to remove the clutch, 

structural damage to the flywheel could 

occur and could subsequently cause the 

flywheel to burst.)

Throughout this manual are special 

“Attention Statements”.

CAUTION!

A statement preceded by the word 
“CAUTION” contains information 
that should be acted upon to prevent 
mechanical damage.

NOTE:

A statement preceded by the word “NOTE” 
contains information that is handy to know 
and may make your job easier.

IMPORTANT!

A statement preceded by the word 

“IMPORTANT” is one that possesses 

special significance.

Do not operate this tool if you are 

tired, ill or under the influence of 

alcohol, drugs, or medicine. 

3

WARNING! Chain saws can be 
dangerous! Careless or improper 
use can result in serious or fatal 
injury to the operator or others.

Read and follow the Operator’s 
Manual. Failure to do so could 
result in serious injury.  

Wear eye and hearing protec-
tion at all times during the oper-
ation of this unit.

Always hold the saw with both 
hands.

Beware of Kickback! Kickback can 
occur whenever the tip of the guide 
bar touches an object while the saw 
is operating. Kickback may force the 
bar up and back toward the opera-
tor with a lightning-fast reaction!

Never let the guide bar tip come 
in contact with any object.

Pinching the saw along the top of 
the guide bar may force the bar 
rapidly back toward the operator. 
Pinching can occur whenever wood 
closes in around the moving chain.

Attention Statements.................................2
Chain Saw Kickback Safety Devices .......3
Additional Safety Precautions ..................4
Safety Labels ..............................................5
Unit Description ........................................6
Specifications .............................................6
Assembly and Adjustments ......................7

Mixing fuel .................................................9
Filling the fuel tank ...................................9
Bar Oil ........................................................9
Starting the Engine .................................10
Stopping the Engine................................11
Adjust Engine Idle ...................................11
Chain Brake .............................................12

Cutting with the Saw ...............................13
Felling Trees ............................................13
Maintenance ............................................15
Long Term Storage .................................16
Saw Chain Performance .........................17
Troubleshooting Guide ..........................18
Limited Warranty Statement ..................20

Serial #

Model #

 

XXXXXXX

 

Shindaiwa Corporation

Hiroshima, Japan/Japon

IMPORTANT ENGINE INFORMATION

Shindaiwa, Inc.

DISPLACEMENT: 50.2 cc  ECS:  EM

ENGINE FAMILY: 8SWXS.050536

THIS ENGINE CONFORMS TO PH1 U.S.  

EPA REGULATIONS FOR SMALL NONROAD 

ENGINES.

REFER TO THE OWNER’S MANUAL FOR 

MAINTENANCE SPECIFICATIONS AND 

ADJUSTMENTS.

Содержание 502s



































































Отзывы: